The PMF series by Posifa Microsystems based on a new chip design with microcontroller processed linear signal. The unique design is very robust against particles and condensing humidity. Resistance to dust, water vapor and shock Sensitivity to low flows Amplified analog output 1 - 5V
MAM005 series enable secure pressure sensing & control starting at 10 Pa. (0,1 mbar). Adjustable pressure set point is between 10 Pa. up to 1300 mbar. A N/O (normally open) contact can be used for 30 mA at 250VAC.
Introtek Air bubble & blood leak detection for medical, analyzer and process application.
Compact integral design with BD3 circuitry Reliable pulse-type, non-invasive, ultrasonic technology Wide range of tubing sizes from 1/16" (1.6mm) up to 1.0" (25.4 mm), including 4mm OD Infusion Tubing
Posifa Technologies was founded as manufacturer of semiconductor sensor chips in California (Silicon Valley) and provide mass air flow sensors for air and gas. The embedded sensor chips are coated with SiCa. Which makes the sensors very robust against particles and liquids. Sensors provide a linear output signal, Vout & digital I²C 14 bit.
non-invasive, ultrasonic air bubble detectors, continuous liquid and point level sensors, optical blood component detectors and pressure/occlusion detectors
